WPA-2440
Range: Depends on Scenario
Description: 4W Bi-directional PowerAmplifier
This product is a bi-directional antenna-mount amplifier designed to match IEEE802.11b/g spread spectrum system to allow the extension of the operating range in wireless environment. The product is designed for 2.4GHz, it works in Time-Division Duplex (TDD) mode that allow the radio device sharing the antenna in different time intervals. The product consist Automatic Gain Controlled (AGC) circuits to maintain the output power and prevent transmit signal saturation. The input transmit power level is sensed by the radio sensor and the amplifier gain is automatically adjusted to minimize the signal distortion, so the desired signal quality can be assured. The product fitted with a Low Noise amplifier (LNA) in receiver to compensate the installation with long cable losses.
| Key Features | |
| Automatic gain control to minimize the signal distortion. | Wide transmit input level(+5dBm~+23dBm) |
| Low Noise Amplifier(LNA) with system noise figure 3.5dB. | Universal 110/220 AC auto switching AC adapter for 12V DC power injector. |
| Lightning protection inside. | DC power injector equipped with lightning protection. |
| Industry standard N-type connector. | Outdoor weatherproof enclosure
|
| Electrical Specifications | |
| Access Method | DS/TDD |
| Operating Frequency | 2.4GHz ~ 2.5GHz |
| Spurious Emission | 30MHz ~ 1 GHz : -36dBm(max.) 1GHz ~ 12.75 GHz : -30dBm(max.) |
| Transmitter output power | 36dBm +/-1dB
(@25C, 5~23dBm input power) 36dBm +/-2dB (@-20C, 5~19dBm input power) 36dBm +/-2dB (@70C, 5~19dBm input power) |
| Receiver gain | 20dB(min.) +/-2dB (at -40dBm input signal) |
| Receiver Noise Figure | 3.5dBm |
| Receiver Return Loss | 14dB(min.) |
| Current Consumption | Transmitter: 3.2A (max.)Receiver: 360mA (max.) |
| Standard Operating Conditions | |
| Temperature Range | -20C ~ +70C
(Operating) -40C ~ +80C (Storage) |
| Operating Humidity (non-condensing) | 5% to 95% RH |
| Supply Voltage | AC 100V~240V
50/60Hz DC 12V/4A |